Equipment

A new, current-production 2-axis slant-bed turning center in the popular 8-inch chuck class, sized for hydraulic cylinder rods, glands, pistons, fittings and general shaft work.

A new set of four portable heavy-duty column lifts for trucks, buses, loaders and other heavy equipment, with 72,000 lb combined capacity.

A new high-pressure hydraulic test bench for proving rebuilt pumps, motors, valves and cylinders, rated to 10,000 psi with a standard working range to 7,500 psi.

A complete new inspection package for a hydraulic cylinder shop: dial bore gauge sets covering 1.4" to 12" bores and a matched set of outside micrometers from 0" to 12".

New selective pallet racking sized for an equipment and parts line: 16' uprights, 42" deep frames, a mix of 8' and 12' bays and three beam levels, with wire mesh decking throughout.

A new freestanding 3-ton workstation bridge crane that covers a full row of rebuild benches without relying on the building structure, with a 20' bridge span and 30' runway.

A new production hose crimper rated for hose up to 2" 6-spiral, for building and repairing hydraulic hose assemblies in-house.

A new square-drive hydraulic torque wrench kit for large fasteners on cylinders, gearboxes and heavy equipment, with a 1,000–8,000 ft-lb range.

A new portable filtration cart for transferring and cleaning hydraulic oil, flushing systems after a rebuild and topping up reservoirs without introducing contamination.

A large-capacity horizontal honing machine for hydraulic cylinder tubes and barrels, honing 2" to 20" bores up to 30' long, completely rebuilt and ready for production.